FCN Series

FCN series dust collector is developed for work that generates dust including sparks such as laser processing machine, plasma processing machine, welding, metal cutting processing, and grinding works. Also, the duct collector has a high-efficiency of welding fume collection function which has a high risk of sucking sparks.

Molded filter

Pulse jet


Max. airflow

Premium efficiency motor

FIRE PREVENTION FUME COLLECTOR (Countermeasures against fire)

  • Have function to prevent sparks-sputter from going into filter box.
  • Have function to absorb heat to sparks and to prevent ignition.
  • Sparks and smoke sensor auto shutdown system.
  • With circle flow separator and heat absorber roller.

Molded cartridge filter

Material: Polyester
Surface treatment: –
Corresponding models: PiEFCNMi and PiH
Application: General dried particles (particle diameter about 10μm)


  • For dust having a particle diameter of about 10μm.
  • Collecting efficiency: Good, Particle diameter about 10μm
  • Heat resistant temperature (F): Normal temperature 40˚C (104˚)
  • Dust removal: Pulse jet

Various type of filter are available

Spark & Smoke Sensor

Sparks sucked into the dust collector are detected by an infrared sensor. Fire breaking out inside the dust collector is detected by a smoke sensor. If a spark enters or a fire inside the dust collector is detected, the dust collector will automatically stop. The safe design, protect your facility from fire.

Circle Flow Separator


Primary separation and heat absorption of dust suctioned into the circle flow separator prevents fires from ignition.

This process separates out more than 70 percent of dust. Lightening the load on the filter in this way, gives the filters a longer service life.

Heat Absorber Roller

Sparks and inflammable dust separated by the circle flow separator are prevented from combusting by the energy absorption and the effect of the heat absorber roller, and inflammable dust are prevented entering the bucket. The energy absorption and dispersion effect of the metal roller work in preventing fires.


Dust separated out by the circle flow separator collects in the bottom bucket, and dust after filterating collects in the bottom bucket of the dust collector. Dust can be removed just by releasing the locking clip and taking out the bucket.

Fire extinguisher port

In case of fire inside dust collector, you can extinguish the fire from the fire extinguisher port.

Control Panel

Panel is designed for good visibility. Warning lamp lights up when sparks or hight temperature dust enter the system. Warning lamp flashes to report that smoke (fire) occurred. Dust collector automatically comes to a stop when a problem occurs.

Filter Cleaning

The pulse jet method cleans the filter by instantly releasing the compressed air and plunging it into the filter. It operates automatically, so there is no need to bother the operator.





  • Plants running 24 hours a day and automated factories.
  • Requiring a high degree of safety.
  • Workplaces with fumes from laser machining.
  • Workplaces with fumes from plasma machining.
  • Workplaces with fumes and sparks in the air from welding and cutting metal.


Particular Unit FCN-30 FCN-45 FCN-60
Power Supply Volt 220 220 220
Frequency Hz 60 60 60
Phase 3P 3P 3P
Output kw/hp 1.5/2.0 2.2/3.0 3.7/5.0
Max Airflow m³/min 18 30 45
Max. Static Pressure kPa 2.55 2.55 2.84
Filter Area 27.0 40.5 60.8
Suction Port Ø mm 150 200 250
Dimension (WxDxH) mm 998x651x1817 1268x660x1827 1358x840x1897
Weight kg 245 305 430