FD-10 – Dust Collector for welding work –

FD-10 210X210

A small mobile welding fume collector with a built-in fire extinguisher mechanism for enhanced safety. Designed to be less likely fire, clog filter and leak dust. It can be moved freely with a small body and casters, and is equipped as standard with a swing arm that can be moved freely in an area with a radius of 1.7M.

Molded filter

Manual shaking type

Fumes

Max. airflow

Premium efficiency motor

Features:

MOVABLE TYPE FUME COLLECTOR

  • Function to prevent sparks-sputter from going into filter box.
  • The sparks contained in the aspirated air are extinguished when passing through "fire fighting swirling flow mechanism" and the fumes are collected by the dust collecting filter of the latter stage.
  • Duct can be freely moved in a radius of 1.7 m.
  • You can reliably collect dust at the optimum position.
  • You can move freely to work place with small body and caster.

Nanofiber filter

Material: PET blend cellulose
Surface treatment: Nanofiber film laminate
Corresponding models: FD-10
Application: Dried fine particles and fumes

Features

  • Noncombustibility
  • For dried fine particles (particle diameter 10μm or less) Flame retardance
  • Collecting efficiency: Very Good, Particle diameter 10μm or less
  • Heat resistant temperature (F): normal temperature 40˚C (104˚)
  • Dust removal: Vibration

FD-10_使用例

Freely move! Movable fume collector

  • Duct wish hood can be freely moved in a radius of 1.7 m.
  • You can move freely to work place with small body and caster.
  • You can reliably collect dust at the optimum position.

FD-10 fire fighting

Fire fighting swirling flow mechanism

  • The sparks contained in the aspirated air are extinguished when passing through "fire fighting swirling flow mechanism" and the fumes are collected by the dust collecting filter of the latter stage

FD-10 filter edit

Flame retardance filter

  • The filter is a flame retardant material composed of synthetic cellulose and polypropylene.

FD-10 filter pix

Large filtration area

  • The nanofiber-coated filter has a compact size but comes with a large filtration area, fine welding fumes can be reliably collected

Internal Structure

FD-10 internal stracture

External View

Unit:mm

FD-10 size

SPECIFICATION

Particular Unit FD-10
Power Supply Volt 220
Frequency Hz 60
Phase 3P
Output kw/hp 0.75/1
Max Airflow m³/min 9.0
Max. Static Pressure kPa 2.5
Filter Area 20
Suction Port Ø mm 160
Dimension (WxDxH) mm 710x868x985
Weight kg 152