IS-15 – Built-in Cyclone Dust collector –

Uses a hybrid isolator device with a large are filtration and cyclone swirling flow dust separation.
Slim and compact.
An environmentally friendly filter with a large filtration area.
It's easy to Dispose of Dust(uses a commercially available container).
It Makes Duct Connection Orientation to Freely (one of six different position can be selected for the suction port and bucket).
It's Easy to Clean Filter (performed by manual shaking).
It's Easy to Replace Filter (just open the top of the unit to replace the filter).

50% or more of dust is separated by cyclone swirling flow before passing through the filter.

Air containing dust particles is sucked inwards, forming a high-speed flow and swirling downwards along the inner surface of the unit. The dust concentration becomes higher as the external airflow becomes faster, and only the airflow with a lower concentration of dust along the inner surface of the unit is filtered. The dust on the outer side of the airflow drops directly into the bucket without making contact with the filter. This primary dust isolation separates out about 50 percent of the dust and reduces the load.

Cyclone swirling flow
50% or more of dust is separated by cyclone swirling flow before passing through the filter.

Particular	Unit	IS-15
Power Supply	Volt	220
Frequency	Hz	60
Output	kw/hp	0.75/1.0
Max Airflow	m³/min	9.0
Max. Static Pressure	kPa	2.0
Suction Port Ø	mm	125
Dimension (W x D x H)	mm	649 x 649 x 1462
Weight	kg	70