The PiH Series dust collector was developed for laser plotters, laser marking processes, and processes where adhesive fume and odor are generated at the same time. The filter coating powder "ZEO POWER" is laminated on the filter surface using a unique method to sticky dust/fume. The laminated ZEO POWER powder at filter protects the filter from fume and also has the effect of extending the life of the filter. Activated carbon deodorizing units remove unpleasant odors generated by laser plotters, laser marking processes, and others.
It is designed for the collection of Fumes from the lased marking process.
- Uses filter coating powder "Zeopower"
- No need for compressed air. The special filter coating powder "Zeopower" supplied to filter by compressed air.
- Adhesive fume generated by resin processing is collected by "Zeopower"
- Activated carbon deodorizing units remove unpleasant odors generated by laser plotters, laser marking processes, and others.
- Max. Airflow 26m³/min
- For dust having a particle diameter of about 10μm.
- Collecting efficiency: Good, Particle diameter about 10μm
- Heat resistant temperature (F): Normal temperature 40˚C (104˚)
- Dust removal: Pulse jet
It strongly absorbs and collects foul odors and harmful gases generated by the laser process.
It is automatically coated on the filter surface with compressed air.
Amano's original filter with a built-in jet amplifier that amplifies the pulse jet effect. The filter can be easily replaced without tools.
- ZEOPOWER protect fume from filter
Fume is highly adherent, it quickly adheres to the filter and causes root clogging.
- Activated Charcoal absorbs bad small such as harmful gas and odor
Activated Charcoal Have characteristics to collect bad small
- Amano Jet Amp Molded Cartridge Filter
Jet Amp filter doubles the effect of pulse jet
|Max. Static Pressure||kPa||2.74||2.84|
|Filter Aid (Zeopower)||kg||6.0||12.0|
|Suction Port Ø||mm||125||200|