Filter for Dust Collector

Material: Cotton
Surface treatment: –
Corresponding models: VNA
Application: General dried particles (particle diameter about 10μm)

Features:

• For dust having a particle diameter of about 10μm.
• Collecting efficiency: Good,  Particle diameter about 10μm
• Heat resistant temperature (F) : normal temperature 40˚C (104˚)
• Dust removal: Vibration

Material: Cotton + fluororesin porous thin film
Surface treatment: Fluororesin porous thin film laminate processing
Corresponding models: VNA
Application: Dried fine particles

Features

• Collecting efficiency: Very Good, For dust having a particle diameter of about 10μm or less.
• Heat resistant temperature (F): normal temperature 40˚C (104˚) 
• Dust removal: Vibration

Material: Polyester
Surface treatment: Metal wire net weaving
Corresponding models:  VNA, VNA-SDN/DN
Application: Electrification characteristic dust (particlediameter about 10μm)

Features

• Specifications give high charge prevention effect and make cause of dust explosion unlikely to occur.
• Collecting efficiency: Very Good, For dust having a particle diameter of about 10μm or less.
• Dust removal: Vibration

Material: Polyester
Surface treatment: –
Corresponding models: PiF
Application: General dried particles

Features

• Collecting efficiency: Good, For dust having a particle diameter of about 10μm.
• Heat resistant temperature (F) : Normal temperature 40˚C (104˚)
• Dust removal: Pulse jet

Material: Polyester
Surface treatment: Stainless evaporation
Corresponding models: PiF-D/SD
Application: Electrostatic characteristic dust (particle diameter about 10μm)

Features

• Specifications give high charge prevention effect and make the cause of dust explosions unlikely to occur.
• Collecting efficiency: Good, Particle diameter about 10μm
• Heat resistant temperature (F): Normal temperature 40˚C (104˚)
• Dust removal: Pulse jet

Material: Polyester+Acrylic resin
Surface treatment: –
Corresponding models: PiF
Application: Dust including watery oil

Features

• Maintains breathability even in dust containing oily and wet particles
• Collecting efficiency: Average
• Heat resistant temperature (F): Normal temperature 40˚C (104˚)
• Dust removal: Pulse jet

Material: Polyester
Surface treatment: –
Corresponding models: PiE, FCN, Mi and PiH
Application: General dried particles (particle diameter about 10μm)

Features

• For dust having a particle diameter of about 10μm.
• Collecting efficiency: Good, Particle diameter about 10μm
• Heat resistant temperature (F): Normal temperature 40˚C (104˚)
• Dust removal: Pulse jet

Material: Polyester
Surface treatment: Fluororesin porous thin film laminate processing
Corresponding models: PiE, FCN, Mi and PiH
Application: Dried fine particles

Features

• Maintains breathability even in dust containing oily and wet particles
• Collecting efficiency: Good, Particle diameter 10μm or less
• Heat resistant temperature (F): Normal temperature 40˚C (104˚)
• Dust removal: Pulse jet

Material: Polyester
Surface treatment: Stainless evaporation
Corresponding models: PiE-SDN/DN
Application: Electrostatic characteristic dust 

Features

• Specifications give high charge prevention effect and make cause of dust explosions unlikely to occur.
• Collecting efficiency: Good, Particle diameter about 10μm
• Heat resistant temperature (F): normal temperature 40˚C (104˚)
• Dust removal: Pulse jet

Material: Polyester+polyethlene+polypropylene
Surface treatment: –
Corresponding models: VF-5HG  and VF-5HN
Application: Fumes adhering during laser marking

Features

• Due to erect fibers on inner surface is not prone to clogging even from adhering fumes, also efficiently traps high percentage of tiny attached fumes by static electricity.
• Collecting efficiency: Very Good
• Heat resistant temperature (F): normal temperature 40˚C (104˚)
• Dust removal: None

Material: PET blend cellulose
Surface treatment: Nanofiber film laminate
Corresponding models: FD-10
Application: Dried fine particles and fumes

Features

• Noncombustibility
• For dried fine particles (particle diameter 10μm or less) Flame retardance
• Collecting efficiency: Very Good, Particle diameter 10μm or less
• Heat resistant temperature (F): normal temperature 40˚C (104˚)
• Dust removal: Vibration

Material: High molecular weight polyethylene
Surface treatment: Polyethylene sintering
Corresponding models: IX, IXR, FPV, FP-N and FPV-2S
Application: Toner fine powder (particle size 10μm or less)

Features

• For fine powders such as toner.
• Water-washable
• Collecting efficiency: Very Good, Particle size 10μm or less
• Heat resistant temperature (F): Normal temperature 40˚C (104˚)
• Dust removal: Pulse jet

Material: Polyester
Surface treatment: Fluororesin porous thin film laminate processing
Corresponding models: WRT, BV and CT
Application: General dried particles (particle diameter about 10μm)

Features

• For dried fine particles (particle diameter 10μm or less)
• Good peelability
• Collecting efficiency: Excellent
• Heat resistant temperature (F): normal temperature 120˚C (248˚)
• Acid-resistant: Average
• Alkali-proof: Average

Material: Polyester
Surface treatment: Singed
Corresponding models: WRT, BV and CT
Application: Dust containing moisture (particle diameter about 10μm)

Features

• This filter has water repellency.
• Maintains breathability even in dust containing watery oil.
• Collecting efficiency: Good
• Heat resistant temperature (F): normal temperature 120˚C (248˚)
• Acid-resistant: Average
• Alkali-proof: Average

Material: Polypropylene 
Surface treatment: Singed
Corresponding models: WRT, BV and CT
Application: Acidic, alkaline dust (particle size about 10μm)

Features

• Collecting efficiency: Good
• Heat resistant temperature (F): Normal temperature 85˚C (185˚)
• Acid-resistant: Good
• Alkali-proof: Good
• Non combustibility: Average

Material: Polyphenylene sulfide
Surface treatment: Singed
Corresponding models: WRT, BV,  CT and HGD
Application: High-temperature dust collection (particle size about 10μm)

Features

• This filter is for high-temperature dust collection.
• Collecting efficiency: Good
• Heat resistant temperature (F): Normal temperature 160˚C (320˚)
• Acid-resistant: Good
• Alkali-proof: Good
• Non combustibility: Average

Material: Toyofuron (fluororesin fiber)
Surface treatment: Special processing
Corresponding models: WRT, BV,  CT and HGD
Application: High-temperature dust collection (particle size about 10μm)

Features

• This filter is for high-temperature dust collection. This filter is preferably detachable and allows air to pass. Besides it has extremely good chemical resistance.
• Collecting efficiency: Good
• Heat resistant temperature (F): Normal temperature 260˚C (500˚)
• Acid-resistant: Excellent
• Alkali-proof: Excellent
• Non combustibility: Good

Material: Polyimide
Surface treatment: Singed
Corresponding models: WRT, BV,  CT and HGD
Application: High-temperature dust collection (particle size about 10μm)

Features

• This filter is for high-temperature dust collection.
• Collecting efficiency: Good
• Heat resistant temperature (F): Normal temperature 240˚C (464˚)
• Acid-resistant: Good
• Alkali-proof: Good

Material: Fluororesin fiber + glass fiber
Surface treatment: Special processing
Corresponding models: WRT, BV,  CT and HGD
Application: High-temperature dust collection (particle size about 10μm)

Features

• This filter is for high-temperature dust collection.
• Extremely good trapping performance and chemical resistance.
• Collecting efficiency: Excellent
  Heat resistant temperature (F): Normal temperature 230˚C (446˚)
• Acid-resistant: Excellent
• Alkali-proof: Excellent
• Non combustibility: Good

Material: Aramid
Surface treatment: Singed
Corresponding models: WRT, BV,  CT and HGD
Application: High-temperature dust collection (particle size about 10μm)

Features

• This filter is for high-temperature dust collection.
• Collecting efficiency: Good
• Heat resistant temperature (F): normal temperature 170˚C (338˚)
• Acid-resistant: Average
• Alkali-proof: Good